Ecobee Door Sensor Installation - PartsXP

 Ecobee manufactures smart sensors for doors and windows. These are the first and foremost sensors that can detect when and whether your doors/ windows are opened/ closed. Ecobee door sensors work with Ecobee Smart Security to give you relevant information regarding the current state of your home. If you have bought this smart sensor from Ecobee and looking to install it, check our Ecobee door sensor installation


Ecobee Door Sensor Installation Instructions

You can install this door smart sensor on single/ double/ sliding doors. And, it would be possible for vertical hinging, vertical sliding, horizontal hinging, or casement windows.

Ecobee smart security uses the contact sensor and occupancy sensor of the smart sensor for doors/ windows for notifying the motion or to detect open/ close events.

Before going to start the Ecobee door sensor installation, we will have a look at its features.

Door Sensor Features

Get alerts

You will get alerts regarding your home security and it is possible to check in with the mobile ecobee application to stay connected.

Personal vantage point

It is able to customize alerts for monitoring where & when you want it.

Autopilot

This feature helps to use family members' as well as registered guests' smartphone locations to arm and disarm the system automatically.

Smart security

The ecobee works with smart security which has been built with advanced technology. This technology alerts you to possible fires or break-ins. Ecobee smart security home monitoring service works with your other ecobee devices to connect the entire home for comfort and peace of mind.

Pairing with Ecobee App

First, you need to proceed with pairing a door sensor to the ecobee app. To pair, follow the steps given below:

1. Open the ecobee application on your mobile.

2. Select the "+" symbol on the home screen of ecobee application.

3. Tap on the smart sensor for the doors and windows section.

4. Next, scan the QR code and complete the pairing and setup instructions that come up.

If the sensor doesn’t pair with the ecobee application, then you need to

  • remove the battery.
  • wait for a few minutes
  • re-insert the battery to restart the detection process.

How to Install an Ecobee Door Sensor?

  • After pairing the door sensor with the mobile app, you will have to continue through the directions for placement.
  • Before mounting the sensor, you must clean the area when you want it installed.
  • The smart sensor has a magnet that works with the base for detecting entry and can go on either side. Make sure that the bottom of the base needs to be in line with the bottom of the magnet.
  • The circular lens of the base detects motion so they need to be in a vertical position with the word "ecobee" in the upright position.
  • While installing, you will check that the base and magnet should be as close together as possible. For the first 15 minutes in the setup mode, the green LED will glow when the base & magnet are close enough for detecting a closed state. After that, that green LED will just blink when your door or windows open or close.
  • Next, move the sensor's base and magnet around to fit at your needed door.

How to Unpair SmartSensor for Doors and Windows?

When you wish to unpair your ecobee smart sensor for doors/ windows, go to the home screen of the app, select the specific tile, and select remove device from the bottom of the mobile application screen.

Where can you see the status of Ecobee SmartSensor for Doors/ Windows?

It is possible to check the status of your door sensor on the homepage of the ecobee application on your mobile. Also, by clicking on the specific tile on the app home screen.

Conclusion

However, the Ecobee door sensor will be the best choice for peace of mind. You can see the status of every movement at your home wherever you are. The smart sensor's 120-degree wide motion sensor catches all activity inside your home. Moreover, ecobee will turn off your AC automatically if the door is opened for 5 minutes so it helps to reduce your energy bill. Hope this Ecobee door sensor installation post helped you to finish your task easily.

Comments

Post a Comment

Popular posts from this blog

4' 40 Amp 4 Wire Range Cord By GE General Electric Hotpoint - Part# WX09X10035

Image
  The  4' 40 Amp 4 Wire Range Cord, part number WX09X10035 , is a product manufactured by  GE  (General Electric) and is also compatible with Hotpoint ranges. This range cord is designed to provide a safe and secure connection between an electric range or stove and the electrical outlet. Here are some key features and details about the GE WX09X10035 range cord: Length and Gauge: The cord is 4 feet long, providing sufficient length for most installations. The wire gauge is rated at 40 Amps, making it suitable for ranges that require this amperage. Wire Configuration: The cord features a 4-wire configuration, which includes four conductors: two hot wires, one neutral wire, and one ground wire. This configuration is commonly used for electric ranges and stoves and is required for proper and safe operation. Compatibility: The WX09X10035 range cord is compatible with a wide range of electric ranges and stoves manufactured by GE, General Electric, and Hotpoint. It is essen...
Read more

Appliances Parts and Supplies- PartsIPS

Image
  In the hustle and bustle of modern life, our household appliances stand as silent sentinels, making our daily routines smoother and more convenient. From the trusty refrigerator that keeps our groceries fresh to the washer and dryer that ensure our clothes are clean and ready, these machines are our everyday heroes. However, like any hero, they can face challenges, and this is where PartsIPS steps in. The Crucial Role of Appliance Parts: Appliance parts  are the unsung heroes behind the scenes, ensuring our appliances operate seamlessly. PartsIPS recognizes this significance and provides an extensive collection of components catering to a diverse range of appliances, from essential kitchen devices to laundry companions. From the most intricate circuitry to the smallest screws,  PartsIPS  offers a comprehensive selection to ensure no appliance repair remains a puzzle. The Authenticity of OEM Parts: In a world full of options, Original Equipment Manufacturer (OEM) pa...
Read more

DANBY PORTABLE WASHER TROUBLESHOOTING - PARTSIPS

Image
Occasionally a problem may arise in your Danby portable washer that is minor in nature and a service call may not be necessary. Some issues are easy fixes and others may require the service of a professional. However, with a little bit of troubleshooting, you will be able to at least have an idea of where the problem has existed Washing Machine Doesn’t Turn On Not plugged In The first step is to check the plug socket. The plug might be loose. Make sure the unit is plugged in firmly and there are no exposed wiring problems. If all these are fine, but still not working, plug in other appliances to determine whether the problem is with the circuit breaker or fuse. You can try to plug the portable washer into another socket and verify if that socket helps. Issues with power cord You have to see the power cord of the Danby portable washing machine for faults. If you notice any exposed wires or heavily frayed areas, you will need to replace them. If you are unable to do the replacement, con...
Read more