How To Reset Cree Smart Bulb? - PartsXP

The best way to smarten up your home is to replace the regular lights with smart LED bulbs. The setting up of these smart LEDs is an easy task and quick operation. However, from time to time errors may occur so you will have to return to the application to reset or troubleshoot. If you need to reset the Cree smart LED bulb, then try these simple steps that may help you to get started. Take a look at this post to know how to reset Cree smart bulb



How to Reset Cree Smart Bulb?

Method I

  • Start with the bulb turned off.
  • Turn ON your smart bulb and you have to wait for two seconds.
  • Next, turn OFF your bulb.
  • Again wait for a few seconds.

You have to repeat the above steps 1 to 4 times until your LED light blinks once. The light blinking indicates that it has been reset. It may happen when you complete the third full ON and OFF cycle. Simply, the bulb should blink the fourth time you turn the bulb ON. It will only dim for a second attempt indicating that it has been factory reset. 

Method II

  • Turn ON the smart bulb and wait about for a second. Then, turn the bulb to OFF.
  • You need to wait for two seconds.
  • Turn ON the LED, wait for a second and then turn it OFF.
  • Wait for two seconds.
  • Again turn ON the bulb, wait for one second and turn it OFF.
  • Wait for two seconds.
  • Turn the bulb to ON, and wait about a second. Turn it OFF and wait for 2 seconds.
  • Again turn ON the LED. Now, your bulb must blink to indicate that it has been reset, and then turn OFF the bulb immediately.

If your bulb fails to reset, you can refer to the setup guide of the manufacturer. There, you can get more information that may help you.

Cree LED Bulb Installation Instructions

Here, we can see the installation instructions for Cree LED lighting that helps you to avoid installation issues.

You can use four compatible hubs to connect your Cree LED bulb. They are Wink Hub, WeMo Link, SmartThings Hub, and other Zigbee-certified hubs.  As there are different installation instructions depending on the compatible hub, you need to follow them accordingly. Here, we are giving Wink installation instructions.

Wink compatible hub requires a wifi network connected with a router using WPA-PSK or open security.

Plug the Wink hub into an outlet. Now, the hub will turn on. If the light on the hub begins to flash purple, you need to notify that the hub is ready to connect.

  • On your mobile, download the Wink app. Open the app and tap on "Add a Product".
  • You need to select the Wink Hub from the product list.
  • View the video about connecting the Wink hub. After viewing the video, tap on the Next button.
  • Enable Bluetooth and Wifi on your mobile. Enter the WiFi network name and password and then tap "Share WiFi". Now, the Wink hub light will flash yellow which indicates it is connecting to your WiFi network.
  • When the hub is connected, the Wink app will display "Success" and the light on the hub will change to solid blue.
  • You can give a name to your Wink Hub or tap done to exit setup.

Pairing the Connected Cree LED Bulb in the Wink App

  • You have to install a single Connected Cree LED bulb in a lamp or light fixture. The switch to the fixture or lamp should be at the OFF position during this time.
  • Now, open the Wink application on your mobile and tap on "Add a Product or the Plus symbol".
  • You need to select your lights from the product list.
  • Select Cree Light Bulb from the lights list.
  • The Wink app guides you through a series of steps. The first step is installing the connected Cree bulb in a lamp/ fixture if needed.
  • The light on the hub will flash blue when ready to add your connected LED bulb.
  • Now, turn ON the connected Cree LED bulb.
  • When the bulb is connected, the app will display "Success" and the light on the hub will show solid green quickly and then stop flashing.
  • After completion of the connection, give a name and tap Done.

Conclusion

Connected Cree LED bulb resetting is also similar to another smart bulb resetting. But, the timing is different. However, we hope this post on how to reset Cree smart bulb helped you to make your job easier. For further assistance, you can refer to the Cree manual.

                    https://www.partsxp.com/blog-how-to-reset-cree-smart-bulb

Comments

Post a Comment

Popular posts from this blog

4' 40 Amp 4 Wire Range Cord By GE General Electric Hotpoint - Part# WX09X10035

Image
  The  4' 40 Amp 4 Wire Range Cord, part number WX09X10035 , is a product manufactured by  GE  (General Electric) and is also compatible with Hotpoint ranges. This range cord is designed to provide a safe and secure connection between an electric range or stove and the electrical outlet. Here are some key features and details about the GE WX09X10035 range cord: Length and Gauge: The cord is 4 feet long, providing sufficient length for most installations. The wire gauge is rated at 40 Amps, making it suitable for ranges that require this amperage. Wire Configuration: The cord features a 4-wire configuration, which includes four conductors: two hot wires, one neutral wire, and one ground wire. This configuration is commonly used for electric ranges and stoves and is required for proper and safe operation. Compatibility: The WX09X10035 range cord is compatible with a wide range of electric ranges and stoves manufactured by GE, General Electric, and Hotpoint. It is essen...
Read more

Appliances Parts and Supplies- PartsIPS

Image
  In the hustle and bustle of modern life, our household appliances stand as silent sentinels, making our daily routines smoother and more convenient. From the trusty refrigerator that keeps our groceries fresh to the washer and dryer that ensure our clothes are clean and ready, these machines are our everyday heroes. However, like any hero, they can face challenges, and this is where PartsIPS steps in. The Crucial Role of Appliance Parts: Appliance parts  are the unsung heroes behind the scenes, ensuring our appliances operate seamlessly. PartsIPS recognizes this significance and provides an extensive collection of components catering to a diverse range of appliances, from essential kitchen devices to laundry companions. From the most intricate circuitry to the smallest screws,  PartsIPS  offers a comprehensive selection to ensure no appliance repair remains a puzzle. The Authenticity of OEM Parts: In a world full of options, Original Equipment Manufacturer (OEM) pa...
Read more

DANBY PORTABLE WASHER TROUBLESHOOTING - PARTSIPS

Image
Occasionally a problem may arise in your Danby portable washer that is minor in nature and a service call may not be necessary. Some issues are easy fixes and others may require the service of a professional. However, with a little bit of troubleshooting, you will be able to at least have an idea of where the problem has existed Washing Machine Doesn’t Turn On Not plugged In The first step is to check the plug socket. The plug might be loose. Make sure the unit is plugged in firmly and there are no exposed wiring problems. If all these are fine, but still not working, plug in other appliances to determine whether the problem is with the circuit breaker or fuse. You can try to plug the portable washer into another socket and verify if that socket helps. Issues with power cord You have to see the power cord of the Danby portable washing machine for faults. If you notice any exposed wires or heavily frayed areas, you will need to replace them. If you are unable to do the replacement, con...
Read more